Right Angle Miter Gearbox Standard Features
Dimensions: right angle miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile steel. Any shaft may be used as a drive.
Gears: Hardened directly miter gears
Bearings: Hardened steel ball bearings, long lasting lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated in 1/3 HP at 1800 RPM. Maximum swiftness is 3000 RPM
Benefits and Cost Savings
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths on input and output
Right Position Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with silent, dependable spiral bevel gears. These superior bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and show multiple mounting options. The fully enclosed design guarantees the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Method Gearboxes are made for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts aswell, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any make use of that demands the reliable transfer of quickness or power, you could look for a two-method gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them well suited for applications such as:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, offering the most dependable and reliable transfer of power available. Our company is known for its innovative designs and producing high-quality movement control solutions designed for engineered overall performance and durability. We provide a range of gearbox styles and a broad selection of versatile shaft couplings to provide you with a full solutions for your mechanical and power transmitting applications.
Right Angle Gearbox
Right angle gearboxes are seen as a the fact that the drive shaft and the result shaft are organized at an angle of 90 degrees. Depending on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Correct angle gearboxes are understood with different types of gear teeth or a combination of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Because of the high solitary stage ratios and the reduced effectiveness level, worm gears can perform a self-locking effect. With worm gears it is also possible to possess a hollow shaft as the drive shaft.
Bevel gearboxes include various kinds of gearing. Bevel gearboxes with intersecting axes are realized using bevel gearing with directly, helical or spiral tooth. Hypoid gearboxes possess helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically sensible ratios with that your bevel gear stage could be realized is larger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes can also be combined with other gearbox types. A frequent software in this respect is the mixture with a planetary gearbox, whereby the planetary gearbox can be linked upstream or downstream. This results in an array of overall multiplication factors and wide range of uses in many industrial applications.
The efficiency level of bevel gearboxes is normally lower than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. This is because the bevel gear stage generates a high degree of axial push and radial pressure, which has to be absorbed by appropriate bearings. This escalates the power loss, which is particularly notable in the drive stage of the gearbox.
The running noise and the transmittable torques of classic bevel gearboxes are also less than with single spur gear teeth. Hypoid gearboxes, however, are incredibly noisy and can transmit huge amounts of torque, but a considerable amount of bearing load takes place in the bevel gear stage of the gearboxes.
In summarizing, a right angle gearbox is usually used when the amount of installation space in the application form is limited, or an angular arrangement between your drive and the output is required by the application. Also, they are used in situations where in fact the input shaft needs to be hollow in order to lead through lines or make use of clamping sets.
The benefits of right angle gearboxes:
Use when installation space is limited
Can be combined with other types of gearbox
Quiet and high amount of torque when working with hypoid gearboxes
Version with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower performance level than planetary gearbox
Lower torques in single-stage ratio range
The Ever-Power, the initial right angle gearbox drive, is more popular and is in use worldwide. The Ever-Power provides manual or power tranny of rotary movement in a concise, standardized right angle device.
Our standard line of bevel gearboxes are available from stock in both an ” and Metric Series, single or dual output shafts, 1:1 or 2 2:1 ratios, and grease lubricated forever and also have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ completely enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, on our CNC machining center and coated with a chemical film to protect the materials, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 models, the pinion shaft can be carbon steel. For the sizes 4 & 5, the material is dark oxide carbon steel. Shafts can be given special extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to your standard models, we will modify our units to meet up your design specifications! Our sales and engineering departments will be ready to support you with your specific application requirements.
Through the years we’ve received questions about nearly every part of the gearbox selection procedure. One of the questions we’ve had a few times is, “Exactly what is a right-angle gearbox or a right-position drive?” Or, more specifically, “How is definitely a right-angle gearbox or drive not the same as a speed reducer or other styles of gearboxes?”
First, let’s start with some basic terminology. It is not uncommon for the terms “gearbox”, “drive” and “swiftness reducer” to be utilized interchangeably.
A gearbox is any gadget that runs on the gear teach to transmit torque/rpm and anything that uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a system with a gear train that can transmit torque/rpm 90 degrees, to turn a corner
A equipment reducer is a system with a gear teach that may reduce rpm output. A result of decreasing rpm is raising torque at the same ratio rate is reduced.
A gear box may also be a speed increaser
The kind of gear used in the apparatus box defines it as a right angle or an inline drive.
A worm equipment drive is a right-angle drive since is a bevel gear
A spur gear drive is inline
A helical gear is inline but can also be a right-angle drive
So, exactly what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in the direction of the shaft. It can be a 1 to at least one 1 ratio or a multiple of 1 1 such as 2:1 or 15:1. If the ratio is 1:1 it really is a right-angle drive. If the ratio is certainly greater than 1:1 it is a right-angle swiftness reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for high performance
Built-in 5 sizes with three types of result shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed opposite to the input shaft.
Three input types can be found : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all areas for easy positioning. The single lubrication chamber guarantees improved warmth dissipation and better lubrication of all internal components.
The mechanism of these gearboxes includes two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of high quality bearings on all the axis ensures extended life to the gearbox and allows high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right angle gearbox
Right Angle Miter Gearbox Standard Features