Select Page

small worm gearbox

Small Precison Worm Decrease Gearboxes
There are numerous of specifications you will need to consider when making a worm small worm gearbox gearbox selection.
First, what is the input and output torque requirements? Next, examine vendor horsepower/torque charts and pick the correct worm gear reducer.
If the size of the gearbox will probably be an important consideration after that check the reducer dimension specs, not all manufacturers make compact units. In fact, working with the right supplier can help you not merely find the right gear reducer but also prevent some of the most typical mistakes in reducer selection. We offer a free guide to assist you find the right supplier to work with.
For low and fractional horsepower program you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output are the major differences between both of these models. Both feature either a hollow or solid result shaft. Both versions are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is so versatile it could work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high accuracy mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in many configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that were created and created to meet your specific specifications.
E mail us for the mini gearbox your application requires, or ask for a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, velocity reducers, equipment drives, and gearmotors. All conditions can be used pretty much interchangeably. Please be aware that the links for our small gear drives include info on the full range of body sizes for that series or design.
Bevel Box Micro Equipment Drive
Our bevel container miniature equipment drives are program rated for the maximum balance of functionality and cost. Torque can be balanced to meet up your RPM and operating life requirements. Lightweight with low backlash functionality (less than 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They provide an result shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined light weight aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc a few minutes of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single input shaft that protrudes from reverse sides of the casing; output is certainly a keyed bore. Standard single- and double-end shafts are available and given keys and retainer bands. An array of gear ratios and input sizes can be found to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long lasting lubrication. They offer two insight shafts on opposing sides of the body, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high efficiency efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes create an output at 90° from the input. They deliver superior efficiency in a wide variety applications and are built with little footprints, making them perfect for operations where space is bound. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for boosts to 3,000 RPM. Aluminium housings and stainless steel gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your the majority of demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver superior performance with high efficiency, and show rugged structure for challenging power transfer procedures. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in virtually any configuration the application requires, with result torque levels as high as 900Nm. We can work from your gearbox designs, reverse engineer a preexisting unit, or assist you to develop an all-new style that delivers the performance you need. Request a quote on a custom miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive essential and retainer rings can be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of one ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings in ” and metric bore sizes. In . and metric precision ground shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox professionals. All of our micro gear drive versions deliver superior functionality in a small footprint, and are rugged enough for challenging work environments. E mail us to learn more about our mini gearboxes, or request a quote on a custom made model that is tailored to your preferences.
Additional advantages of worm drive gearboxes include:

Recent Posts

worm gearbox

As one of leading worm gearbox manufacturers, suppliers and exporters of mechanical products, We offer worm gearbox and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm gearbox