• Motor gearboxes are maintenance-free, compact power resources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and three phase choices for your individual needs.
• Key feature of the drives are a self-braking worm gear transmission and an integral linear limit switch device.
shaft-installed gear motors are full electromechanical drives in which the speed of the installed electrical motor is reduced to the desired value using two to four reduction stages. The drives are powerful and durable and feature a concise and lightweight design.
The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent fat loss compared to commercially available drive motors. That is attained through the consistent application of light weight aluminum die casting technology, which guarantees a high amount of rigidity for the gear and motor housing simultaneously.
Each drive is produced and tested particularly for every order and customer. A advanced modular system permits an excellent diversity of types and a optimum degree of customization to client requirements.
Because of their integrated control units, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, described end positions are guarded by two position limit switches. This uncomplicated solution does not just simplify the cabling, but also makes it possible to configure the end positions efficiently. The high shut-off accuracy of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a metal shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and stop after set number of turns. After that it can open and close the home windows for greenhouse ventilation to right positions.
To keep up the delicate environment in the greenhouse, environment control systems certainly are a necessity. Numerous mechanical systems can be applied in this respect; however glass vent drive systems tend to be the most popular. The drive system consists of a central gearmotor connected to a 40:1 correct angle reducer 
with dual output shafts. These OP shafts hook up to long jack shafts that spread across the roof line of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large glass screen panes in the ceiling for temperature control.
According to the size of the application (length of the shafting, volume and weight of the windows panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are ranked continuous since the glass pane home windows may potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also called Motor Gearboxes, is a specific kind of electrical motor that is designed to create high torque while maintaining a minimal horsepower, or low acceleration, motor output. Gear motors can be found in many different applications, specifically for the greenhouse, livestock and agricultural sector, our motors can be found options to use roof vents, wall vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be quickly taken out without disturbing the entire shaft.
shaft-mounted gear motors are comprehensive electromechanical drives where the speed of the installed electrical motor is decreased to the required value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.
Fascinated in finding out more about greenhouse gear motor? Look into our internet site.