This standard selection of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. These were particularly developed for make use of with state-of-the-art servo motor technology, providing restricted integration of the electric motor to the machine. Angular backlash of significantly less than 1 arc-minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of engine couplings and installation flanges are for sale to assembly to virtually all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Device and Robotics.
helical-worm servo gearmotors have a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and decrease the expenditure for valuable installation space.
The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you with superb attenuation properties for the procedure of your systems with low degrees of vibration. This is because of the longitudinal app of drive on the insight shaft. This enables torque impulses to be prevented efficiently and for maximum results in conditions of running smoothness and sound reduction to be achieved.
Both the equipment unit, and the synchronous servomotor are based on our modular system. This allows you to have fully individual configuration options for each application. One factor is certain – Our servo gearmotors are actual specialists for very particular requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, velocity reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a equipment in the kind of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other gear reduction boxes. A primary benefit of worm equipment reducers is usually that they produce an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox offers 
right hand threads; to change the path of the result, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability may be limited to the main point where it requires gearing. As servo producers develop better motors that can muscle mass applications through more complicated moves and produce higher torques and speeds, these motors require gearheads the same to the task.
Quit browsing for articles about worm drive servo – obtain all the important info in one click!