Standard fastener manufacturer

Main business: bevel gear box worm gear box bolt nut stem

current position:Home > News Center
Causes of valve stem fracture and bending
Time: 2021-06-10

If you want to know about our products, you can call our company at any time!

Causes of valve stem fracture and bending
Curved stem
Bent valve stems are generally common in gate valve failures. Of course, ball valves and globe valves may also occur.The main cause of valve stem bending is stress.The main source of stress is that the valve stays in the same state for a long time without movement, so that the valve stem is squeezed by the upward stress on the copper sleeve and the stress concentration cannot be eliminated, thereby forming the valve stem at the copper sleeve.Of course, this is related to the stem material and valve structure.But it is directly related to the state of use of the valve.
The usual processing method is to process a new replacement according to the size.Pay attention to several points of processing here. First, the size must be accurate to ±0.01, second, the direction and pitch of the thread must be accurate, third, polishing to the mirror effect is necessary, fourth, the choice of material is very important, and general requirements Quench after processing.
Broken stem
The breakage of the valve stem is usually caused by improper operation.When the valve is in a state of slight internal leakage, our operators always feel that it is not closed in place when closing the valve, so the force is far greater than the design torque to close, which causes the valve stem to break.Therefore, it is very important to use the appropriate torque when operating the valve.Of course, some valves are difficult to operate because of foreign matter jamming or other reasons, but this is not the reason that the design torque should be used for operation.As the processing requirements for replacement are consistent with the above processing requirements!

Henan standard parts_fasteners_hex head nuts_bolts_valve stem_bevel gearbox_worm gearbox manufacturers wholesale_Zhengzhou Ever-Power Co., Ltd.

Zhengzhou Ever-Power Co., Ltd. All rights reserved