Standard fastener manufacturer

Main business: bevel gear box worm gear box bolt nut stem

current position:Home > News Center
Troubles and solutions in the process of using the worm gear box
Time: 2021-02-24

If you want to know about our products, you can call our company at any time!

Troubles and solutions during the use of the worm gear box:
1. Due to the damage of the polyurethane sealing ring in the small oil cylinder, the pressure oil enters the worm gear box body, causing the pressure oil in the oil filling hole on the top of the worm gear box to emerge or the lubricating oil level displayed on the worm gear box oil level to increase significantly.
2. Because the horizontal pin on the push rod is broken and the clutch disc cannot be driven, the pressure oil output by the auxiliary pump can meet the requirements after measurement, but the knife cannot be cut or the paper cannot be cut.
3. The noise caused by the quality of the double vane pump itself and the lack of oil or damage to the bearing in the middle of the pulley cause abnormal noise when the machine is running dry.
4. Damage to the skeleton oil seal at the shaft head of the double vane pump causes air to often appear in the pipeline.
5. There is a small amount of regular knife slip phenomenon during the cutting process.
Zhengzhou Ever-Power Co., Ltd. All rights reserved