worm motor

Worm travel gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where an easy to match, high torque end result is required. Great for student based tasks including robots and buggies.
The machine has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The engine is snap fitted into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and additional applications where excessive torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them perfect candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at very low voltages. We recommend that you use stall-detection sensors, or just view your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on the smaller threaded end of the shaft, although it is not specifically intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new criteria for reliability, efficiency and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration today and a really future proof option. The Ever-Power gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange alternatives. The motor terminal box can be mounted in option positions rotated in 90º steps around the electric motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a good corner turn, optional dual result, or an inability for the motor to be back driven. The DC right angle equipment motors are made for continuous and intermittent duty operation. Our right angle gear reducers were created with a number of mounting plate options, making them ideal for a number of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision trim gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Items will work with you to design and produce a Worm Gear Motor that may optimize the performance of your unique application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Chop / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for sturdiness and a high torque output. Due to the special mechanical structure of the worm travel the engine output shaft is certainly self locking and can not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where great gear ratios are essential. Our worm geared motors will be therefore optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to meet your needs.
Worm gear devices impress with their large power density and compact design. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP housing, you can expect an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be glad to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear devices feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable a simple assembling for the customer.
Additional drive configurationscan be designed by use of built-about accessories (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Engine attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load rate, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm extensive, 40mm high, a robust worm travel gearbox powered by an MM28 electric motor (included), most ideal for applications where a simple to fit, high torque output is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to fit, high torque outcome is required
Perfect for student based projects including robots and buggies
Reversible Substantial torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Great torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that is, regarding motor without electric, the output axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole motor output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where large holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option when compared to spur gear motor. How come worm gear so particular? Take a look wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the direction of transmission (input shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the better friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm can be used. This is normally a advantage when it’s desired to eliminate any probability of the result driving the input.”
In other phrases, it is difficult to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g