Hex nuts are common.Let's take a look at the basic knowledge of hex nuts and find out why hex nuts are commonly used?
1. On the machine, the position of the nut is not sufficient, and the wrench space for screwing the nut is also very narrow.For the hexagonal nut, you only need to turn the wrench 60 degrees at a time to tighten the nut slowly, while the quadrilateral nut needs to be turned 90 degrees at a time.
2. To make the nut into a hexagonal shape is to make full use of the material.Because from the standpoint of strength, large nuts are stronger than small nuts.In the past, nuts were usually ground out of round materials.The same round rod with it

Related is the introduction of hex nuts.Because it is easy to use and improves the utilization rate of materials, it is widely used in the market.Although the hex nut is only a small fastener, it is not easy to purchase or confirm the manufacturer, and it is more secure in terms of quality.

Henan standard parts_fasteners_hex head nuts_bolts_valve stem_bevel gearbox_worm gearbox manufacturers wholesale_Zhengzhou Ever-Power Co., Ltd.